Instead of having a header with a bottom margin followed by an element
with a negative margin, it makes more sense to have no margin on either
element.
On high-resolution screens where neither the menu nor the main content
were filling the screen, there was a blank space at the bottom which
looked weird.
The <main> tag was including the navigation, and now we use the same
flex layout, making it more accessible for mobile phone users.
I'm not sure the <main> tag should actually include the account info and
the flash message. I'm keeping it like this in order to keep the layout
the way it was.
While Foundations's off-canvas menu allows us to forget about writing
CSS, it also leads to complicated HTML.
Ideally Foundation would provide an easy way to simplify what we're
doing, but I haven't found anything in the documentation.
We could simplify the HTML a bit more if we used a CSS grid layout
instead of a flex one, but old browsers have better support for the
latter.
Note we're using `breakpoint(medium)` so we can group the CSS for small
screens and follow SCSS-Lint rules at the same time.
Also note behavior of the main area when the menu appears on small
screens is slightly different: it doesn't move the main content to the
right. I've done it this way so we don't have any overflow issues,
unlike the previous version.
There's a small issue using a label and a checkbox to enable/disable the
menu: sighted keyboard users with a small screen might not be able to
enable the menu. So we're adding the `:focus-within` pseudoclass so the
menu can be normally navigated using the keyboard. Even if old browsers
don't support this pseudoclass, we believe the probability of a sighted
user using a small screen, navigating with the keyboard and using an old
browser is really low, particularly in the admin area.
We're also adding the `aria-hidden` attribute on the label, since the
menu is never hidden for screen readers and so having a control to show
it could be confusing. Since the label is not focusable, we're complying
with the fourth ARIA rule:
> Do not use role="presentation" or aria-hidden="true" on a focusable
> element .
>
> Using either of these on a focusable element will result in some users
> focusing on 'nothing'.
In commit 74083df1 we added the possibility to assign administrators and
valuators to budgets, so they would only manage the budgets they're
assigned to.
However, when filtering projects, we were still showing all
administrators and valuators as options to filter investments. It makes
more sense to only show the valuators and administrators assigned to the
current budget.
Note this change only affects the view, and so malicious users could
technically send any other administrator or valuator ID. In this case,
they would get empty results since those administrators/valuators
wouldn't have any investments assigned, so taking this case into account
is not necessary.
We had helper methods all over the place which were only used in one
view. Since we're going to change some of them to use the budget as a
parameter, they don't belong in those helpers anymore.
Note the method `budget_heading_select_options` is used in more places,
so we're keeping it where it was.
It was removed in commit 128a8164 because we hadn't reviewed it nor
tested it properly. We're now adding it again, fixing the issues we've
found while reviewing.
This way we can simplify the HTML and easily apply font awesome icons to
any element.
Note the mixin uses `extend`, which we generally try to avoid. It's OK
in this case, since `fa-` classes only have one rule, affecting the
content of its `::before` pseudo-element. Unfortunately we can't use
`include fa-content($fa-var-#{$icon})` because it's not valid SCSS. We
could make the mixin accept an icon instead of an icon name, and call it
using `has-fa-icon(r, $fa-var-plus-square)`. However, IMHO that would
make the code a bit more complex with no real benefit.
Legislation Processes created through the admin form were getting the default color.
However, Legislation processes created by other means (like the `db:dev_seed` rake task) were not getting these default values.
This feature was originally implemented when we were using Rails 4.
With Rails 5, we can provide default values to all new Legislation processes
and simplify the code at the same time thanks to its `attribute` method.
Related commit:
https://github.com/consul/consul/pull/4080/commits/0b83be6
According to the jQuery upgrade guide:
> It is almost always a mistake to use .removeAttr("checked") on a DOM
> element. The only time it might be useful is if the DOM is later going
> to be serialized back to an HTML string. In all other cases,
> .prop("checked", false) should be used instead.
It worked differently after upgrading to jQuery 3. According to the
jQuery upgrade guide:
> It is almost always a mistake to use .removeAttr("checked") on a DOM
> element. The only time it might be useful is if the DOM is later going
> to be serialized back to an HTML string. In all other cases,
> .prop("checked", false) should be used instead.
We've had to add a couple of hacks in order to make jQuery UI datepicker
work with Turbolinks, and one of our tests is failing because the
datepicker changes its height when changing from a month with 5 weeks to
a month with 6 weeks.
We could add a workaround so the test still passes (jQuery UI doesn't
provide a configuration option to always displays 6 weeks in the
datepicker), but I think it's easier to just use the HTML5 native date
input field, which also allows us to simplify the code a bit and IMHO it
improves the user experience, particularly when using mobile phones.
Since date fields are not supported in Safari and Internet Explorer,
we're still using the jQuery UI datepicker on those browsers (and on any
other browser not supporting date fields).
Due to these changes, we're moving the tests checking datepicker's
behaviour to the dashboard. I've choosing not to change the public pages
because I'm not 100% sure everybody would like this change (some people
prefer the datepicker because we can configure the way it looks).
When Foundation initializes a page that has any sticky element, it
loads a window scroll listener into window object to handle the sticky
element positioning when scrolling. This works great until user moves
to a page without sticky elements and the window listeners remain
attached to the window object on this new page too when there is no
need to run the scrollListener and there is no sticky elements so the
window scroll listener cannot find the sticky object on that page a lot
of errors are thrown when user scrolls.
With this approach we are destroying sticky elements before leaving
the page which also remove the Sticky scrollListener from the window
object.
I do not know how to write a test to demonstrate this fix, but at least
there is some steps to reproduce this behavior:
0. Undo this commit
1. Go to any proposal page
2. Click on any link (with Turbolinks enabled)
3. Scroll the page
4. Check the console log. Yo will find as error occurrences as pixels you scrolled.
It's known that Foundation Sticky causes some renderization problems
when rendering sticky elements in anchored position.
The problem seems to be that Foundation Sticky is showing the
support box on medium and up devices overlapped with "Share" and
"Community" sidebar boxes when loading proposal page through
Turbolinks and when restoring the page from brwoser history.
Foundation seems to be doing some top property dynamic calculation
(javascript) and is setting top property to `206px` when it should be
`0px`. Notice that this do not happen on page first load (without
Turbolinks). Check foundation/foundation-sites issue 11098.
Another workaround could be to remove sticky feature for bigger that
small devices (medium large xlarge xxlarge).
Check foundation/foundation-sites issue 9892.
The JavaScript involved wasn't working since we removed the disable-date
attribute in commit 73ff6881.
We're also improving the JavaScript in two ways:
First, we trigger the `change` event immediately, so when the page loads
date fields are disabled when phases are disabled.
And second, we don't remove the selected dates when disabling a phase,
so disabling it and enabling it again will keep the selected values.
We were using a <label> tag with no associated field where a <legend>
tag was more appropriate. With a fieldset, we also make it obvious these
fields are related.
Rails automatically disables buttons when submitting a form. This works
fine most of the time: for AJAX requests, it enables them again after
the request is complete, and for non-AJAX requests, the button is
replaced by a new element when the new page loads.
However, there's an exception. When a request returns data so users can
download a fire, the request is not an AJAX one and the button is not
replaced. So users are left with a disabled button they can no longer
click.
So in this case, we aren't disabling the button after a user clicks it.
After updating foundation-rails in commit 58071fd6, the orbit slider
stopped working properly. That's because the `.orbit-slide` elements now
use a `position: absolute` rule, and so our rule for `.orbit-container`
elements making their height 100% (which we added in order to be able to
add images with different heights) makes them have a height of 0px,
since now the `.orbit-slide` elements are not part of the document flow
anymore.
Making the `.orbit-slide` elements have relative position fixes this
issue, but introduces a different one, producing a really bad-looking
animation when changing a slide.
So we're disabling the animation as well in order to avoid this jump.
This change also fixes another issue introduced in commit 58071fd6 which
caused slide controls to stop working when changing slides back and
forth.
Banners created through the admin form were getting the default color.
However, banners created by other means (like the `db:dev_seed` rake
task) were not getting these default values.
This feature was originally implemented when we were using Rails 4.
With Rails 5, we can provide default values to all new banners and
simplify the code at the same time thanks to its `attribute` method.
Now, when creating a new banner, instead of getting a blank space, we
get an empty line with the banner's default background color, which most
users won't know what it's about until they fill in the banner's title.
So we're not displaying the content of the banner when it's empty,
thanks to the `:empty` CSS pseudoclass.
In some sections we had negative top margins to compensate the header
bottom margin. However, when adding a banner between the header and
those sections, the negative margin caused the content of those sections
to overlap with the content of the banner.
Removing the negative margins when a banner is present solves the issue.
When a user recovers a page from browser history where placed a
marker in different map pane (visible map layer) marker was
successfully added to the map but the map center is the one
defined at Settings map properties so the marker was not visible
to the user.
Now when map_location form has valid coordinates we use them
instead of default map center settings. This will avoid the user to
have to rellocate the marker (or find the correct pane where the
marker was added) if already placed.
When using an editable map is better to load marker latitude, longitude and
map zoom from form fields so we can show the marker at latest position defined
by user when the page was restored from browser history.
To reproduce this behavior:
0. Undo this commit
1. Go to new proposal page
2. Place the proposal map marker
3. Go away to any other page
4. Restore new proposal page from browser history.
At this point you should not see the recently placed marker.
The same thing happens when editing a proposal.
If we do not do this a map could be initialized twice times or more
when restoring a page with a map causing weird UI effects and
loading some map layers also twice times or more.
Need to add a maps array to be able to store all initialized
(visible) maps so we can destroy them when needed. Notice that
we are destroying maps also when admin settings tabs changes
(only visible ones), this is again to avoid to re-initialize map more
than once when users navigate through settings tabs, another
option to the settings issue could be to detect if the map was
already initialized to skip uneeded initialization.
It was being duplicated when restoring a page by using browser
history. With this solution we will avoid to have screen readers
descriptions more than once inside any sociual share button.
