We're using the `aria-label` attribute instead of a label because this
is a page where only one field is rendered and the text of the label is
the same as the text of the <h1> tag.
We're using `aria-label` instead of `aria-labelledby` because the former
is supported by Capybara.
In order for this attribute to be applied, due to the syntax of the
`select` method, it should be in a separate hash.
We're removing it instead of correctly applying it because we never use
the `tabindex` attribute with a positive value, since it might break
keyboard navigation.
We reduce code duplication thanks to that, and make it easier
to change this field.
Note that there was one place where the "16.years" value was
hardcoded. We're moving the test for this case to the
component and changing it so the test doesn't use the default
age.
We're also removing the redundant helper method that had the
same code as a method in the User class which is called
everywhere else.
Since the main stats index loads this JavaScript using
`"data-turbolinks-track" => "reload"`, going from the stats index to a
section that doesn't include this JavaScript did the strange effect
Turbolinks does in these situations: it first loaded the page using an
AJAX request and, after getting the contents of the page, it reloaded it
in order to apply the changes in the included JavaScript.
This behavior was a bit confusing, particularly when browsing to a
section of the admin stats, clicking the browser's back button to go
back to the stats index, the going to another section, ...
One of the admin stats tests was failing sometimes with this message:
```
1) Stats Budget investments Supporting phase Number of users and
supports in investment projects
Failure/Error: raise ex, cause: cause
Selenium::WebDriver::Error::UnknownError:
unknown error: unhandled inspector error:
{"code":-32000,"message":"Node with given id does not belong to the document"}
(Session info: chrome=129.0.6668.89)
```
This was probably caused by the mentioned Turbolinks behavior that loads
the page twice. It's possible that Selenium was somehow checking the
node related to the first request when the second request had finished.
Avoiding that double request solves the issue.
This way it'll be easier for people using screen readers to know which
element the checkbox is related to.
Note that we're using the `aria-label` attribute because it makes
testing with Capybara easier than using the `aria-labelledby` attribute.
The only exception are the comments, since comments don't have a title
and there isn't a proper label for them. In this case, we're using the
title of the associated commentable as the label; we might change it in
the future since there might be many comments for the same commentable.
As mentioned in commit 5311daadf, there are several reasons to use
buttons in these situations. And, as mentioned in the previous commits,
using buttons instead of links for actions requiring confirmation will
help us test for accessibility issues.
As mentioned in commit 5311daadf, there are several reasons to use
buttons in these situations. And, as mentioned in the previous commits,
using buttons instead of links for actions requiring confirmation will
help us test for accessibility issues.
As mentioned in commit 5311daadf, there are several reasons to use
buttons in these situations. And, as mentioned in the previous commits,
using buttons instead of links for actions requiring confirmation will
help us test for accessibility issues.
Since we're adding styles for this button, we're also adding the
`font-size` property instead of using the `small` class. We'll deal with
the `float-right` property in the next commit.
As mentioned in commit 5311daadf, there are several reasons to use
buttons in these situations. And, as mentioned in the previous commit,
using buttons instead of links for actions requiring confirmation will
help us test for accessibility issues.
Note that we're changing the component so it uses `polymorphic_path`;
that way we don't have to pass the `@budget` variable to the component.
We could also use `budget_investment_path investment.budget, investment`
instead.
Using a checkbox wasn't very intuitive because checkboxes are
checked/unchecked when clicked on even if there's an error in the
request. Usually, when checkboxes appear on a form, they don't send any
information to the server unless we click a button to send the form.
So we're using a switch instead of a checkbox, like we did to
enable/disable phases in commit 46d8bc4f0.
Note that, since we've got two switches that match the default
`dom_id(record) .toggle-switch` selector, we need to find a way to
differentiate them. We're adding the `form_class` option for that.
Also note that we're now using a separate action and removing the
JavaScript in the `update` action which assumed that AJAX requests to
this action were always related to updating the `visible_to_valuators`
attribute.
Just like it happened with proposals, the button to select/deselect an
investment wasn't very intuitive; for example, it wasn't obvious that
pressing a button saying "selected" would deselect the investment.
So we're using a switch control, like we do to enable/disable features
since commit fabe97e50.
Note that we're making the text of the switch smaller than in other
places because the text in the investments table it is also smaller
(we're using `font-size: inherit` for that purpose). That made the
button look weird because we were using rems instead of ems for the
width of the button, so we're adjusting that as well.
Also note we're changing the width of the switch to `6em` instead of
`6.25em` (which would be 100px if 1em is 16px). We're doing so because
we used 100 for the minimum width because it's a round number, so
now we're using another round number.
We don't need to replace the whole row, since the changes only affect
the button. Therefore, we don't need to depend on an `inserted` event to
decide which columns to render in that row.
This code isn't used since commit c9f31b8e1.
Since we no longer depend on the content of the `#investments` element
being in a separate partial, we're also moving this element to the
partial itself and adding an HTML class to it, like we usually do.
We're also removing the code that loads all the investments in the
`toggle_selection` action, which wasn't needed since commit 3278b3572,
when we stopped rendering all the investments in this action.
This way we'll be able to simplify it a little bit.
Note that the original partial didn't include the whole row and only
the cells. Since, most of the time, we include the whole row in
partials, we're slightly modifying the component.
Since this button is replaced by a new element in an AJAX call, nothing
was focused after pressing it.
So we're reusing the code we used to enable/disable budget phases, which
already dealt with this issue.
When clicking the browser's back button, browsers usually don't reload
the page but show a cached version of the page.
Turbolinks takes this one step further. When clicking on a link to a
page that's already cached, turbolinks displays the cached version of
the page and then it reloads it.
I don't really like this behavior but, since it affects the whole
application and we're about to release a patch version :), for now we're
keeping it this way in the development and production environments.
In the test environment, however, we're disabling these previews because
they might lead to requests leaking between tests.
For example, a test that visits the investments index, then goes to
"check my votes", then clicks on "Go back" and finishes by checking some
content on this page will result in those checks being done against the
cached version of the page. If these checks pass before turbolinks
reloads the page, the "Go back" request will finish during the test that
runs immediately after this one, resulting in unpredictable results.
Disabling the previews solves the issue.
It was confusing to have the action to create an answer in
`QuestionsController#answer` while the action to destroy it was
`AnswersController#destroy`.
In commit 9329e4b6e, `try` was added because there was a case where this
partial was rendered and the `current_booth` method didn't exist.
However, that's no longer the case since commit d5c7858f6. Since then,
this partial is only rendered in the officing section, where the
`current_booth` method is defined.
So we can use the safe navigation operator instead of `try`.
Having a class named `Poll::Question::Answer` and another class named
`Poll::Answer` was so confusing that no developer working on the project
has ever been capable of remembering which is which for more than a few
seconds.
Furthermore, we're planning to add open answers to polls, and we might
add a reference from the `poll_answers` table to the
`poll_question_answers` table to property differentiate between open
answers and closed answers. Having yet another thing named answer would
be more than what our brains can handle (we know it because we did this
once in a prototype).
So we're renaming `Poll::Question::Answer` to `Poll::Question::Option`.
Hopefully that'll make it easier to remember. The name is also (more or
less) consistent with the `Legislation::QuestionOption` class, which is
similar.
We aren't changing the table or columns names for now in order to avoid
possible issues when upgrading (old code running with the new database
tables/columns after running the migrations but before deployment has
finished, for instance). We might do it in the future.
I've tried not to change the internationalization keys either so
existing translations would still be valid. However, since we have to
change the keys in `activerecord.yml` so methods like
`human_attribute_name` keep working, I'm also changing them in places
where similar keys were used (like `poll_question_answer` or
`poll/question/answer`).
Note that it isn't clear whether we should use `option` or
`question_option` in some cases. In order to keep things simple, we're
using `option` where we were using `answer` and `question_option` where
we were using `question_answer`.
Also note we're adding tests for the admin menu component, since at
first I forgot to change the `answers` reference there and all tests
passed.
This is consistent with the way we've got partials to render debates,
proposals and legislation processes on their index pages.
Note that, while adding the tests for the status icon, we're keeping one
system test because it also tests the process of voting. We're adding a
new, similar component test, where the voter is created in the database,
so all possible statuses are tested in the component.
The float property was removed in commit b71c61e40, but then it was
added again in commit 4a6313fed.
It might have been necessary to do so back then because we had a
`select` field instead of the links to set the order, but now, instead
of making them float on the left and then make the next element clear
the floats, we can do nothing and obtain the same results.
