We're only calling the `block_for` method from one place: the
`content_block` helper, and we're never passing the locale parameter to
that helper, which means we're always calling `block_for` using
`I18n.locale`.
So I'm not sure why we were doing the `locale ||=` assignment, since
`I18n.locale` doesn't return nil.
In any case, since this was added in commit c1de2dced, Ruby has added
support for arguments forwarding, so we can use it here to simplify the
code a little bit.
Note that, currently, we take these settings from the database but we
don't provide a way to edit them through the admin interface, so the
locales must be manually introduced through a Rails console.
While we did consider using a comma-separated list, we're using spaces
in order to be consistent with the way we store the allowed content
types settings.
The `enabled_locales` nomenclature, which contrasts with
`available_locales`, is probably subconsciously based on similar
patterns like the one Nginx uses to enable sites.
Note that we aren't using `Setting.enabled_locales` in the globalize
initializer when setting the fallbacks. This means the following test
(which we could add to the shared globalizable examples) would fail:
```
it "Falls back to an enabled locale if the fallback is not enabled" do
Setting["locales.default"] = "en"
Setting["locales.enabled"] = "fr en"
allow(I18n.fallbacks).to receive(:[]).and_return([:fr, :es])
Globalize.set_fallbacks_to_all_available_locales
I18n.with_locale(:fr) do
expect(record.send(attribute)).to eq "In English"
end
end
```
The reason is that the code making this test pass could be:
```
def Globalize.set_fallbacks_to_all_available_locales
Globalize.fallbacks = I18n.available_locales.index_with do |locale|
((I18n.fallbacks[locale] & Setting.enabled_locales) + Setting.enabled_locales).uniq
end
end
```
However, this would make it impossible to run `rake db:migrate` on new
applications because the initializer would try to load the `Setting`
model but the `settings` table wouldn't exist at that point.
Besides, this is a really rare case that IMHO we don't need to support.
For this scenario, an installation would have to enable a locale, create
records with contents in that locale, then disable that locale and have
that locale as a fallback for a language where content for that record
wasn't created. If that happened, it would be solved by creating content
for that record in every enabled language.
This rule was added in rubocop 1.44.0. It's useful to avoid accidental
`unless !condition` clauses.
Note we aren't replacing `unless zero?` with `if nonzero?` because we
never use `nonzero?`; using it sounds like `if !zero?`.
Replacing `unless any?` with `if none?` is only consistent if we also replace
`unless present?` with `if blank?`, so we're also adding this case. For
consistency, we're also replacing `unless blank?` with `if present?`.
We're also simplifying code dealing with `> 0` conditions in order to
make the code (hopefully) easier to understand.
Also for consistency, we're enabling the `Style/InverseMethods` rule,
which follows a similar idea.
All the code in the `bin/` and the `config/` folders has been generated
running `rake app:update`. The only exception is the code in
`config/application.rb` where we've excluded the engines that Rails 6.0
has added, since we don't use them.
There are a few changes in Active Storage which aren't compatible with
the code we were using until now.
Since the method to assign an attachment in ActiveStorage has changed
and is incompatible with the hack we used to allow assigning `nil`
attachments, and since ActiveStorage now supports assigning `nil`
attachments, we're removing the mentioned hack. This makes the
HasAttachment module redundant, so we're removing it.
Another change in ActiveStorage is files are no longer saved before
saving the `ActiveStorage::Attachment` record. This means we need to
manually upload the file when using direct uploads. We also have to
change the width and height validations we used for images; however,
doing so results in very complex code, and we currently have to write
that code for both images and site customization images.
So, for now, we're just uploading the file before checking its
dimensions. Not ideal, though. We might use active_storage_validations
in the future to fix this issue (when they support a proc/lambda, as
mentioned in commit 600f5c35e).
We also need to update a couple of tests due to a small change in
response headers. Now the content disposition returns something like:
```
attachment; filename="budget_investments.csv"; filename*=UTF-8''budget_investments.csv
```
So we're updating regular expression we use to check the filename.
Finally, Rails 6.0.1 changed the way the host is set in integration
tests [1] and so both `Capybara.app_host` and `Capybara.default_host`
were ignored when generating URLs in the relationable examples. The only
way I've found to make it work is to explicitely assign the host to the
integration session. Rails 6.1 will change this setup again, so maybe
then we can remove this hack.
[1] https://github.com/rails/rails/pull/36283/commits/fe00711e9
Since we're going to remove Paperclip and Active Storage doesn't provide
any validations, we have to either write our own validation rules or use
a different gem.
We're using the file_validators gem instead of the
`active_storage_validations` gem because the latter doesn't support
proc/lambda objects in size and content type definitions. We need to use
them because in our case these values depend on settings stored in the
database.
Just like we did with regular attachments, we're moving the logic to
generate URLs out of the model.
Note we're changing the `image_path_for` helper method in order to
return a `polymorphic_path` because sometimes it's used in combination
with `favicon_link_tag`, and `favicon_link_tag` doesn't automatically
generate a polymorphic URL when given an `ActiveStorage::Attachment`
record.
In order to migrate existing files from Paperclip to ActiveStorage, we
need Paperclip to find out the files associated to existing database
records. So we can't simply replace Paperclip with ActiveStorage.
That's why it's usually recommended [1] to first run the migration and
then replace Paperclip with ActiveStorage using two consecutive
deployments.
However, in our case we can't rely on two consecutive deployments
because we have to make an easy process so existing CONSUL installations
don't run into any issues. We can't just release version 1.4.0 and 1.5.0
and day and ask everyone to upgrade twice on the same day.
Instead, we're following a different plan:
* We're going to provide a Rake task (which will require Paperclip) to
migrate existing files
* We still use Paperclip to generate link and image tags
* New files are handled using both Paperclip and ActiveStorage; that
way, when we make the switch, we won't have to migrate them, and in
the meantime they'll be accessible thanks to Paperclip
* After we make the switch, we'll update the `name` column in the active
storage attachments tables in order to remove the `storage_` prefix
Regarding our handling of new files, the exception are cached
attachments. Since those attachments are temporary files used while
submitting a form and we have to delete them afterwards, we're only
handling them with Paperclip. We'll handle these ones in version 1.5.0.
Note the task creating the dev seeds was failing after these changes
with an `ActiveStorage::IntegrityError` exception because we were
opening some files without closing them. If the same file was attached
twice, it failed the second time.
We're solving it by closing the files with `File.open` and a block. Even
though we didn't get any errors, we're doing the same thing in the
`Attachable` concern because it's a good practice to close files after
we're done with them.
Also note we have to change the CKEditor Active Storage code so it's
compatible with Paperclip. In this case, I haven't been able to write a
test to confirm the attachment exists; I was getting the same
`ActiveStorage::IntegrityError` mentioned above.
Finally, we're updating the site customization image controller to use
`update` so the image and the attachment are updated within the same
transaction. This is also what we do in most controllers.
[1] https://www.youtube.com/watch?v=tZ_WNUytO9o
Instead of adding the padding to each individual element inside the
container, why not adding padding to the container itself? The answer is
"because we want the background of the children elements to take the
width of the whole screen". But this generates either HTML cluttered
with elements to add padding or repetitive padding definitions in the
CSS.
So now we only define the padding once, and when an element requires a
full width background or border, we use the `full-width-background`
mixin.
In this case the code is a bit more complex because the header is also
used in the dashboard and admin layouts:
* In the public layout, the body has a margin, so we include the mixin
to take margin into account
* In the dashboard layout, the header itself has a margin, so we include
the same mixin
* In the admin layout, the headet doesn't have a margin but gets the
whole width, so in this case we include the mixin which dosen't take
the margin into account
In the future, the idea is to apply this principle to the <body>
element and remove the `@include grid-column-gutter` in the CSS as well
as the `small-12 column` classes in the HTML.
Note we use the `calc()` function inside the mixin instead of using it
in the `$full-width-margin` variable. That way we avoid nested `calc()`
operations, which don't work in Internet Explorer.
Also note we're using `flex-grow: 1` to make one element appear on the
left of the screen and the other one on the right. It would be easier to
use `justify-content: space-between` (which is actually the default for
the top-bar element). However, there's a bug in Internet Explorer and
old versions of Firefox; they include the absolutely-positioned
`::before` element we use to set the full width background when
calculating where to position the elements. The bug was fixed in Firefox
52 (released in 2017).
Finally, we're removing the padding from our logo. In order to allow
logos like the new one and at the same time provide backwards
compatibility to logos in existing CONSUL installations, we're relaxing
the validation rule for the logo width.
So now we'll be able to add them to other sections.
We're also adding a `dependent: :destroy` relation to models having
cards since it doesn't make sense to have cards around when their page
has been destroyed.
Not doing so has a few gotchas when working with relations, particularly
with records which are not stored in the database.
I'm excluding the related content file because it's got a very peculiar
relationship with itself: the `has_one :opposite_related_content` has no
inverse; the relation itself is its inverse. It's a false positive since
the inverse condition is true:
```
content.opposite_related_content.opposite_related_content.object_id ==
content.object_id
```
We were very inconsistent regarding these rules.
Personally I prefer no empty lines around blocks, clases, etc... as
recommended by the Ruby style guide [1], and they're the default values
in rubocop, so those are the settings I'm applying.
The exception is the `private` access modifier, since we were leaving
empty lines around it most of the time. That's the default rubocop rule
as well. Personally I don't have a strong preference about this one.
[1] https://rubystyle.guide/#empty-lines-around-bodies
This way we guarantee there will be at least one translation for a model
and we keep compatibility with the rest of the application, which
ideally isn't aware of globalize.
