We were using generic names like `args` and `options` which don't really
add anything to `*` or `**` because Ruby required us to.
That's no longer the case in Ruby 3.2, so we can simplify the code a
bit.
We are ensuring that only position field is rendered only on
non-header cards.
Note that we have 3 sections that use widget cards:
- Homepage (cards and header cards)
- Custompages (only have cards)
- Sdg Homepage (cards and header cards)
Before this change, two important things depend on the format of each key,
where to render it in the administration panel and which kind of interface
to use for each setting. Following this strategy led us to a very complex
code, very difficult to maintain or modify. So, we do not want to depend
on the setting key structure anymore to decide how or where to render each
setting.
With this commit, we get rid of the key format-based rules. Now we render
each setting explicitly passing to it the type and the tab where it belongs.
Instead of using a setting nested param `setting[:tab]`. We only need
the tab param when rendering settings in the administration section.
This change will make it easier rendering the correct tab after
updating settings.
This way it won't be possible to browse all user URLs by just going to
/users/1, /users/2, /users/3, ... and collect usernames, which might not
be desirable in some cases.
Note we could use the username as a URL parameter and just find the user
with `@user = User.find_by!(id: id, username: username)`, but since
usernames might contain strange characters, this might lead to
strange/ugly URLs.
Finally, note we're using `username.to_s` in order to cover the case
where the username is `nil` (as is the case with erased users).
This way only verified users will be able to access this page, which
shows the username of the receiver of the direct message. With this,
it's no longer possible for unverified users to browse direct message
URLs in order to collect usernames from every user.
Even if pretty much nobody uses a browser with JavaScript disabled when
navigating our sites, there might be times where JavaScript isn't loaded
for reasons like a slow internet connections not getting the JavaScript
files or a technical issue.
So we're making it possible to still use the like/unlike buttons in
these cases.
As far as possible I think the code is clearer if we use CRUD actions
rather than custom actions. This will make it easier to add the action
to remove votes in the next commit.
Note that we are adding this line as we need to validate it that a vote
can be created on a comment by the current user:
```authorize! :create, Vote.new(voter: current_user, votable: @comment)```
We have done it this way and not with the following code as you might
expect, as this way two votes are created instead of one.
```load_and_authorize_resource through: :comment, through_association: :votes_for```
This line tries to load the resource @comment and through the association
"votes_for" it tries to create a new vote associated to that debate.
Therefore a vote is created when trying to authorise the resource and
then another one in the create action, when calling @comment.vote.
As far as possible I think the code is clearer if we use CRUD actions
rather than custom actions. This will make it easier to add the action
to remove votes in the next commit.
Note that we are adding this line as we need to validate it that a vote
can be created on a debate by the current user:
```authorize! :create, Vote.new(voter: current_user, votable: @debate)```
We have done it this way and not with the following code as you might
expect, as this way two votes are created instead of one.
```load_and_authorize_resource through: :debate, through_association: :votes_for```
This line tries to load the resource @debate and through the association
"votes_for" it tries to create a new vote associated to that debate.
Therefore a vote is created when trying to authorise the resource and
then another one in the create action, when calling @debate.vote_by (which
is called by @debate.register_vote).
This syntax has been added in Ruby 3.1.
Not using a variable name might not be very descriptive, but it's just
as descriptive as using "block" as a variable name. Using just `&` we
get the same amount of information than using `&block`: that we're
passing a block.
We're still using `&action` in `around_action` methods because here we
aren't using a generic name for the variable, so (at least for now) we
aren't running this cop on controllers using `around_action`.
We were getting a warning since upgrading to Rails 6.1:
DEPRECATION WARNING: Calling `delete` to an ActiveModel::Errors messages
hash is deprecated. Please call `ActiveModel::Errors#delete` instead.
So we're deleting the error instead of deleting the message.
We were getting a warning in one of the tests:
DEPRECATION WARNING: Rendering actions with '.' in the name is
deprecated: application/nonExistentJavaScript.js
I haven't found a case where the behavior on production environments is
different due to this change; the application seems to behave the same
way as it used to. So I'm not adding tests for this change.
This rule was added in rubocop 1.44.0. It's useful to avoid accidental
`unless !condition` clauses.
Note we aren't replacing `unless zero?` with `if nonzero?` because we
never use `nonzero?`; using it sounds like `if !zero?`.
Replacing `unless any?` with `if none?` is only consistent if we also replace
`unless present?` with `if blank?`, so we're also adding this case. For
consistency, we're also replacing `unless blank?` with `if present?`.
We're also simplifying code dealing with `> 0` conditions in order to
make the code (hopefully) easier to understand.
Also for consistency, we're enabling the `Style/InverseMethods` rule,
which follows a similar idea.
Note we're excluding a few files:
* Configuration files that weren't generated by us
* Migration files that weren't generated by us
* The Gemfile, since it includes an important comment that must be on
the same line as the gem declaration
* The Budget::Stats class, since the heading statistics are a mess and
having shorter lines would require a lot of refactoring
We were using `prepend: true`, but it doesn't seem to be necessary.
We were also loading the draft versions twice in the index, so we can
remove the line loading them a second time.
We forgot to remove it in commit 8066b96fe. We're removing it now
because these methods didn't follow the Layout/BlockAlignment rubocop
rule, which we're about to add.
For the HashAlignment rule, we're using the default `key` style (keys
are aligned and values aren't) instead of the `table` style (both keys
and values are aligned) because, even if we used both in the
application, we used the `key` style a lot more. Furthermore, the
`table` style looks strange in places where there are both very long and
very short keys and sometimes we weren't even consistent with the
`table` style, aligning some keys without aligning other keys.
Ideally we could align hashes to "either key or table", so developers
can decide whether keeping the symmetry of the code is worth it in a
case-per-case basis, but Rubocop doesn't allow this option.
We were already applying these rules in most cases.
Note we aren't enabling the `MultilineArrayLineBreaks` rule because
we've got places with many elements whire it isn't clear whether
having one element per line would make the code more readable.
Since IRB has improved its support for multiline, the main argument
towars using a trailing dot no longer affects most people.
It still affects me, though, since I use Pry :), but I agree
leading dots are more readable, so I'm enabling the rule anyway.
By using the bindPopup function instead of the click event
popups work when using the keyboard.
Note that now we are loading all the map markers in the first
request in a single query to the database (needed when there
is a lot or markers to show). Because of that we removed the
AJAX endpoint.
Note that in the budgets wizard test we now create district with no
associated geozone, so the text "all city" will appear in the districts
table too, meaning we can't use `within "section", text: "All city" do`
anymore since it would result in an ambiguous match.
Co-Authored-By: Julian Herrero <microweb10@gmail.com>
Co-Authored-By: Javi Martín <javim@elretirao.net>
In the commit: 315c57929a this code was added, but at that time this field
was no longer in use, even though it existed in the database.
I don't know why this line was added, but there seems to be no point in
keeping it.
The only view that linked to this action was never used and so it was
deleted in commit 0bacd5baf.
Since now the proposals controller is the only one place rendering the
`shared/map` partial, we're moving it to the proposals views.
